Bliss Anand America Certifications

Bliss Anand America is proud to uphold the highest standard in not only our products, but also our manufacturing process. With various US, Canadian and international certifications in hand, we can supply level, pressure and flow instrumentation globally, as well as mechanical skids for the up-, mid- and downstream industries.


Screen Shot 2017-06-15 at 4.13.15 PM

Below is a partial list of our current certifications. We are constantly adding more to our repertoire to make sure we are prepared for any requirements on your project site:

  1. ASME S & U Stamp – our manufacturing facility, based in La Porte, TX, received the ASME S & U stamps shortly after we opened shop.
  2. ASME B31.3 – All our welders are certified to ASME B31.3 standards. Weld joints on our products are full-bore, full-penetration welds, making for stronger, longer lasting joints.
  3. ASME PP, UM & R – we have obtained the ASME PP, UM and R certifications for our mechanical division.
  4. ISO 9001 – We have the ABS Quality Evaluation Certificate of Conformance for Quality Management Systems.
  5. ISO 14001 – As a company with a strong environmental conscience, Bliss Anand America has been certified for ISO 14001 for Environmental Management Systems.
  6. OHSAS 18001 – Bliss Anand America’s Health and Safety Management System has been assessed and certified by ABS Quality Evaluations.
  7. FM & CSA Approvals – We have received FM & CSA approvals for a variety of products, most recently for our Magnetostrictive Level Transmitters and Radar Transmitters.
  8. ATEX – We have obtained the ATEX Certification for our Radar Transmitter Line.
  9. INMETRO – With expansion plans for South America, and primarily Brazil, Bliss Anand America has applied for the INMETRO certification on our product lines.
  10. TSSA, ABSA, Technical Safety Authority of Saskatchewan – As multiple clients have projects in Canada, Bliss Anand America has been successfully assessed by, and received certifications from TSSA, ABSA and the Technical Safety Authority of Saskatchewan.

Does your project have a requirement that we haven’t mentioned? Get in touch at for a full list of our certifications and approvals.





The Bliss Anand Manufacturing Facility in the U.S.A.

Quality takes precedence, and the best way to produce instrumentation that meets every standard is to manufacture it all right here in Texas.


Our North American production facility is located in La Porte, the Oil & Gas hub of the continent. With 20,000 sq. ft. of covered manufacturing space to house our experienced level instrumentation teams, the 2-acre property also encompasses our newly launched Energy Equipment Division.

Our facility follows a strict 3-step inspection protocol – inward, in-process and outward inspections for all products. For each product, the raw materials are received and checked twice against the BOM to ensure that we’ve received the right parts. From there, your gauge will move into machining, where we cut, drill and more. We make sure to transfer the tracing numbers onto each piece of your instrument so that you’re able to track it back to the foundry if required. Each piece is double checked for size and dimension before going forward.

The machined parts then move into welding, where our ASME-Certified welders make sure to create full bore, full penetration welds of the highest quality. The products are assembled, hydrostatically tested as a standard along with any additional testing you require, packaged and shipped to your project destination.

We also have a specialized Diaphragm Seal filling station with 6 filling ports that allow us to fill up as many as 10,000 seals per year.


Thinking about partnering with us and want to take a look? Give us a call or send us an email and we’d be happy to schedule an audit or tour!

Call now at 281.479.2547 or email at

See you soon!