Bliss Anand America Certifications

Bliss Anand America is proud to uphold the highest standard in not only our products, but also our manufacturing process. With various US, Canadian and international certifications in hand, we can supply level, pressure and flow instrumentation globally, as well as mechanical skids for the up-, mid- and downstream industries.


Screen Shot 2017-06-15 at 4.13.15 PM

Below is a partial list of our current certifications. We are constantly adding more to our repertoire to make sure we are prepared for any requirements on your project site:

  1. ASME S & U Stamp – our manufacturing facility, based in La Porte, TX, received the ASME S & U stamps shortly after we opened shop.
  2. ASME B31.3 – All our welders are certified to ASME B31.3 standards. Weld joints on our products are full-bore, full-penetration welds, making for stronger, longer lasting joints.
  3. ASME PP, UM & R – we have obtained the ASME PP, UM and R certifications for our mechanical division.
  4. ISO 9001 – We have the ABS Quality Evaluation Certificate of Conformance for Quality Management Systems.
  5. ISO 14001 – As a company with a strong environmental conscience, Bliss Anand America has been certified for ISO 14001 for Environmental Management Systems.
  6. OHSAS 18001 – Bliss Anand America’s Health and Safety Management System has been assessed and certified by ABS Quality Evaluations.
  7. FM & CSA Approvals – We have received FM & CSA approvals for a variety of products, most recently for our Magnetostrictive Level Transmitters and Radar Transmitters.
  8. ATEX – We have obtained the ATEX Certification for our Radar Transmitter Line.
  9. INMETRO – With expansion plans for South America, and primarily Brazil, Bliss Anand America has applied for the INMETRO certification on our product lines.
  10. TSSA, ABSA, Technical Safety Authority of Saskatchewan – As multiple clients have projects in Canada, Bliss Anand America has been successfully assessed by, and received certifications from TSSA, ABSA and the Technical Safety Authority of Saskatchewan.

Does your project have a requirement that we haven’t mentioned? Get in touch at for a full list of our certifications and approvals.





Cost Saving Solutions

At Bliss Anand America, we like to provide innovative solutions at affordable prices. With international codes and certifications under our belt, we provide top-quality products with significant cost savings across all our lines.

Our Instrumentation Division includes:

  • Magnetic Level Gauges
  • Sight Glasses
  • Radar Transmitters
  • Sight Flow Indicators
  • Magnetostrictive Level Transmitters
  • Diaphragm Seals – Standard and Specialty


Our Mechanical Division includes:

  • Upstream Packages
  • Midstream Packages
  • Downstream Packages
  • Turnkey Solutions
  • Process-Based Modules
  • Engineered Modules


For more information, please download our cost-saving summary sheet here:

Bliss Anand America Cost Saving Solutions

Magnetostrictive Level Transmitter

Bliss Anand takes pride in providing a 360-solution for your level monitoring needs. With our BAMR liquid level transmitter, you are able to keep constant track of your process fluid levels without a direct line of sight, from within a control room.


The Magnetostrictive Level Transmitter provides analog communication for Magnetic Level Gauge applications. You can externally mount it without interrupting the monitoring process that is already being conducted by your Magnetic Level Gauge, and the sensing elements and electronics can be removed without disturbing the operation process either.


We want you to make it easy for you to use the BAMR transmitter, so we provide a variety of mounting options and pipe styles. If required, your transmitter can also come equipped with an on-board display and keypad for local indication and programming.

With FM and CSA approvals for US and Canadian requirements, our Magnetostrictive Level Transmitters can be used on your projects for a secondary method of liquid level monitoring.

Download our Magnetostrictive Transmitter Catalogue to learn more about the product here: magnetostrictive_transmitter

Want to know more, or see how these products can be best utilized in your project? Send us an email at

The Bliss Anand Manufacturing Facility in the U.S.A.

Quality takes precedence, and the best way to produce instrumentation that meets every standard is to manufacture it all right here in Texas.


Our North American production facility is located in La Porte, the Oil & Gas hub of the continent. With 20,000 sq. ft. of covered manufacturing space to house our experienced level instrumentation teams, the 2-acre property also encompasses our newly launched Energy Equipment Division.

Our facility follows a strict 3-step inspection protocol – inward, in-process and outward inspections for all products. For each product, the raw materials are received and checked twice against the BOM to ensure that we’ve received the right parts. From there, your gauge will move into machining, where we cut, drill and more. We make sure to transfer the tracing numbers onto each piece of your instrument so that you’re able to track it back to the foundry if required. Each piece is double checked for size and dimension before going forward.

The machined parts then move into welding, where our ASME-Certified welders make sure to create full bore, full penetration welds of the highest quality. The products are assembled, hydrostatically tested as a standard along with any additional testing you require, packaged and shipped to your project destination.

We also have a specialized Diaphragm Seal filling station with 6 filling ports that allow us to fill up as many as 10,000 seals per year.


Thinking about partnering with us and want to take a look? Give us a call or send us an email and we’d be happy to schedule an audit or tour!

Call now at 281.479.2547 or email at

See you soon!


Flow Measurement – Metering Skid

screen-shot-2016-12-01-at-10-07-09-amA metering skid is a fully mounted unit on which several assemblies can be installed. With Custody Transfer being the primary use of such a skid, we are proud to announce that our Energy Division is capable of customizing our metering skids to suit your Custody Transfer needs for both liquids and gas.


Our experienced engineering team takes the time sit discuss exact requirements with each customer in order to design the ideal skid. These discussions will include all controllable and non-controllable variables in order to determine appropriate materials and construction methods.


  • 2 x 100% Filter Separators with Indirect Water Bath Heaters
  • Interconnecting piping
  • Valves
  • Instrumentation
  • Electrical components
  • PLC-based control panels for unattended operation
  • Compact and well-engineered layout to facilitate easy access to valves


Major Components

  • Multiple Meters/Meter Runs
  • Flow Computers
  • Quality measurement: Fluid Energy Contents
  • Master Meter Calibrations
  • Supporting Automation & Communication Systems
  • Filteration & Conditioning
  • Heating
  • Pressure Regulation & Flow Control
  • Sampling Systems


  • Metering Skids are designed to optimize operation and maintenance costs
  • Ultrasonic / Coriolis Flow meters are used to meet the highest accuracy in flow measurement
  • The location of the skid can be user defined
  • Temperature and pressure are constantly monitored using instruments for best accuracy
  • Operations are controlled by an automated or manual Central Control Unit
  • Removal of solids and liquid drops is facilitated using a Cartridge Filter Skid located at the stream inlet
  • An end-to-end process connection is installed within the basic frame structure
  • Provisions are included for suitable grouting at the site

Our metering skids meet international requirements such as ISO, and we are also certified for certain national metrology standards such as GOST-R in Russia and GOST-K in Kazakhstan.

ASME Certified Welding

There’s welding… and then there’s up-to-standard, ASME-Certified welding. And we know that your projects require the best. That’s why, at Bliss Anand, we pride ourselves on making sure that everything we do is of the highest quality.


As a result, all our products and welders are certified to ASME B31.3 standards. The Process Piping certification is typically aimed at companies operating in petroleum, chemical and cryogenic industries. It covers materials and components, design, fabrication, assembly, erection, examination, inspection and testing of the piping.

Having our welders certified to this standard allows us to create full-bore, full-penetration welds where most manufacturers only have full-bore welds. Our products have stronger weld joints and are longer lasting, with no danger of process fluid accumulation on the nozzle.


We have supporting documents in the form of WPS, PQR and WPQ, so give us a ring if you want to know more!