Unique Diaphragm Seal Solutions

At Bliss Anand America, we don’t like saying the word no. We know that we have experienced engineering and production teams, and armed with the right tools, we believe they can solve any problem.

So when BP came to us with a unique solution, we put our best people to the test. Working with our partners Badotherm, Bliss created a special solution to suit BP’s requirements.

The Application:

  • Very high process 
temperature – 760°F
  • Small process connection – 
no larger than 1”
  • Process fluid is a gas with high levels of hydrogen, and small amounts of H2S and NH3

The Concerns:

  • Are there any fill fluids that handle temperatures up to 760°F?
  • EJX430 (preferred Yokogawa gauge pressure transmitter) can only handle up to 248°F
  • Durability of gold coating – specifically regarding thermal shock at startup
  • Materials and NACE certification requirements

Bliss-Badotherm’s ApproachIMG_1625

  • Use BSO-48 as a fill fluid to handle temperatures ranging from -4 – 788°F
  • Use EJX530A transmitter rather than EJX430, as it contains fully welded construction (no gaskets or threads). It is highly recommended for high temperature/high pressure applications
  • Supply a 1 piece BF design with a thermal reducer
  • Supply gold-coated seal with 40μm on 316L diaphragm and other wetted parts. Alloy 400 specified by customer is only suitable for temperature below 392°F

Through perseverance, a lot of back and forth and discussion, and a creative mindset for solving problems, Bliss-Badotherm is now the only supplier (globally) for gold-coated seals with high temperature fill fluids.

IMG_1626

For more information about our Gold-Coating, download our brochure here: Badotherm Diaphragm Seal Solution Gold Coating

For more information about our High Temperature Diaphragm Seals, download our brochure here: htds-seal-solutions

Diaphragm Seal Repair

Diaphragm Seals are typically used with pressure transmitters, but can also be used with pressure gauges and pressure switches. They are recommended in applications where the process medium is:

  • is aggressive, corrosive, toxic and/or highly viscous
  • has a (extremely) high or low temperature
  • has crystallization and/or polymerization

Given the above applications, seals are often subjected to harsh environments, rendering them damaged. High temperatures can ruin seals by heating fill fluids. High pressure water jets, corrosive materials and dents can also cause damage.

cover_003.jpg

Bliss Anand understands that constantly replacing your diaphragm seals can get expensive, so we offer Diaphragm Seal Refurbishment Services. We will replace an old Diaphragm Seal from an existing transmitter-seal assembly at half the cost of a new transmitter-seal assembly, so you can get your project running smoothly again with minimal disturbance.

Benefits of Seal Renewal

After

  • Significantly more economic than ordering a completely new instrument
  • Before executing the order, the transmitter is tested for proper functioning, so there are no unnecessary costs for a repair executed in vain
  • All brands of pressure transmitters are compatible and new Diaphragm Seals can be mounted to them
  • A clear and written quotation, so you have a clear insight in the costs and actions beforehand
  • A repair/renewal of Diaphragm Seals often provides valuable information regarding the process and offers the opportunity of a better solution for increased lifetime

For more information, download our catalogue: Badotherm Diaphragm Seals Repair Service or call us at 281.479.2457 if you have questions about Diaphragm Seal Refurbishment.

Boiler Water Level Gauge

Page 1 - diagram 1

The BN200 series is bi-color boiler water level gauge that meets ASME Section I –Power Boiler requirements, using high quality material and adhering to safety standards. The BN200 Bi-Color water level gauge can handle a maximum pressure of 220 kgf/cm2 (216 barG), and a maximum temperature of 701°F (372 °C).

Principles of the BN200 Series Bi-Color water level gauge

The air phase in the water level gauge is red and the liquid phase is green, ensuring a very clear visual of the water level. When the prism shaped liquid chamber of the water level gauge is filled with a clear liquid, due to the prism effect of the liquid chamber section, the light injected is bent extensively. However, when the liquid chamber is filled with air (gas) the light bending effect is slight and almost all of the injected light travels straight.

When color filters (red/green or red/blue) are set in the illuminator, as show in the diagrams on the left, the following different light phenomena occur: red light is transmitted when air (gas) covers the glass surface while green light is transmitted when transparent liquid covers the surface.

Page 1 - diagram 2

Accessories

Page 5 - image 2

  • Developed for use with the BN200 series water level gauge, we have created a composite unit comprised of a special metal ring fused to glass that is extremely heat resistant. As the glass and metal are integrally fused together, the glass is stronger than most products, reducing the chance of glass damage almost completely.
  • Our innovative glass solution contains several oxides to improve its resistance to alkalis. These include zirconia, rare earths and alumina, all of which are highly resistant to dissolving, and maintain this property when incorporated into glass. It also contains properties found in regular glass such as heat stability and mechanical strength, allowing it to be used for industrial applications.

For more information, download our brochure and data sheet here:

Bliss Anand America Certifications

Bliss Anand America is proud to uphold the highest standard in not only our products, but also our manufacturing process. With various US, Canadian and international certifications in hand, we can supply level, pressure and flow instrumentation globally, as well as mechanical skids for the up-, mid- and downstream industries.

Certifications

Screen Shot 2017-06-15 at 4.13.15 PM

Below is a partial list of our current certifications. We are constantly adding more to our repertoire to make sure we are prepared for any requirements on your project site:

  1. ASME S & U Stamp – our manufacturing facility, based in La Porte, TX, received the ASME S & U stamps shortly after we opened shop.
  2. ASME B31.3 – All our welders are certified to ASME B31.3 standards. Weld joints on our products are full-bore, full-penetration welds, making for stronger, longer lasting joints.
  3. ASME PP, UM & R – we have obtained the ASME PP, UM and R certifications for our mechanical division.
  4. ISO 9001 – We have the ABS Quality Evaluation Certificate of Conformance for Quality Management Systems.
  5. ISO 14001 – As a company with a strong environmental conscience, Bliss Anand America has been certified for ISO 14001 for Environmental Management Systems.
  6. OHSAS 18001 – Bliss Anand America’s Health and Safety Management System has been assessed and certified by ABS Quality Evaluations.
  7. FM & CSA Approvals – We have received FM & CSA approvals for a variety of products, most recently for our Magnetostrictive Level Transmitters and Radar Transmitters.
  8. ATEX – We have obtained the ATEX Certification for our Radar Transmitter Line.
  9. INMETRO – With expansion plans for South America, and primarily Brazil, Bliss Anand America has applied for the INMETRO certification on our product lines.
  10. TSSA, ABSA, Technical Safety Authority of Saskatchewan – As multiple clients have projects in Canada, Bliss Anand America has been successfully assessed by, and received certifications from TSSA, ABSA and the Technical Safety Authority of Saskatchewan.

Does your project have a requirement that we haven’t mentioned? Get in touch at sales@blissanandusa.com for a full list of our certifications and approvals.

 

 

 

Cost Saving Solutions

At Bliss Anand America, we like to provide innovative solutions at affordable prices. With international codes and certifications under our belt, we provide top-quality products with significant cost savings across all our lines.

Our Instrumentation Division includes:

  • Magnetic Level Gauges
  • Sight Glasses
  • Radar Transmitters
  • Sight Flow Indicators
  • Magnetostrictive Level Transmitters
  • Diaphragm Seals – Standard and Specialty

 

Our Mechanical Division includes:

  • Upstream Packages
  • Midstream Packages
  • Downstream Packages
  • Turnkey Solutions
  • Process-Based Modules
  • Engineered Modules

 

For more information, please download our cost-saving summary sheet here:

Bliss Anand America Cost Saving Solutions

Low Gauge Pressure Diaphragm Seals

Standard diaphragm seals limit you to measuring down to 100mbar. Beyond this, measurements are inaccurate and often not possible at all.

This can be problematic when trying to measure lower pressure applications, so we are offering you a solution – our Low Gauge Pressure Seals, developed for measuring pressures as low as 5mbar with minimal temperature effects.

Screen Shot 2017-05-22 at 11.20.16 AM

Typically, in order to obtain low-pressure readings in applications, nitrogen blankets are used to prevent process gases from entering the atmosphere. You need to be able to accurately measure and monitor the pressure of the nitrogen blanket in order to minimize its interference with the process in the vessel.

Unfortunately, nitrogen blankets with an overpressure are unstable in a corrosive environment that uses diaphragm seals. The combination of the seal and the low overpressure range (approximately 10mbar for nitrogen blankets) results in high temperature effects when exposed to process and ambient conditions. The high temperature effects then lead to unreliable and unstable data.

With the Low Gauge Pressure Diaphragm Seal, the minimum GP range reduces from 80 mbar with a standard Diaphragm Seal to only 5 mbar with the LGP Diaphragm Seal. Similarly the ambient temperature effect reduces from 0.006 psi (0.4 mbar) per 50°F (10°C) to 0.0004 psi (0.03 mbar) per 50°F (10°C), while the process temperature effect reduces from 0.006 psi (0.39 mbar) to 0.001 psi (0.09 mbar).Screen Shot 2017-05-22 at 11.20.26 AM

The LGP Diaphragm Seal also provides additional benefits:

  • The way of mounting the transmitter to the vessels has no effect on the zero and span adjustments of the transmitter, so there is no zero adjustment required
  • There is no effect on the performance by a change in the density of the fluid caused by ambient temperature fluctuations; so there is no mounting effect.

For more information, please download the LGP Diaphragm Seal brochure here: Badotherm Diaphragm Seal Solution Low Gauge Pressure (LGP)

Bliss Anand America – Global Facilities

image23When Bliss Anand first began in 1975, the founder, Mr. Prem Anand, had a vision – to grow the company into a globally recognized leader in field instrumentation. As his sons took over his legacy, they cultivated Bliss into a company with a network of five manufacturing facilities and numerous sales offices around the world, creating quality products in level, pressure and flow instrumentation and mechanical equipment.

The first facility was built in Manesar, and continues to be the Bliss Group Headquarters. It houses a manufacturing shop as well as a corporate office dedicated to customers in Asia and the subcontinent.

image22When Mr. Anand’s sons took over the company, they expanded to a manufacturing facility in the Jebel Ali Free Zone in Dubai, the industrial hub of the UAE. Bliss quickly established a firm presence in the Middle East with a 70% market share, by providing customers with high quality level and field instrumentation built with sound engineering.

As the demand for Bliss products continued to increase in the region, our manufacturing capacity needed keep up. In 2008, Bliss opened a another manufacturing facility in Asia.

This 20,000 sq. ft. facility now houses a crane, in-house testing capabilities for a variety of instruments and packages, and state-of-the-art machinery.

In 2012, Bliss opened its headquarters in America, located in La Porte, TX. Our 2-acre plot, housing a 20,000 sq. ft. manufacturing floor, including a 10-ton crane.

For more information on our US facility, click here. Feel free to drop by for a tour of the shop and to learn about our products! Drop a line to sales@blissanandusa.com.

Bliss is currently in the process of building two more facilities, a new, 65,000 sq. ft. location in Dubai, as well as one in Saudi Arabia. Our plans for expansion also include Brazil in the near future.

Bliss is committed to going the extra mile to provide on-the-ground, local support, no matter which corner of the globe your project is located in.